Browser update required

Welcome to rolex.com. In order to provide you with the best possible experience, rolex.com requires an up-to-date browser. Please use a newer browser to explore our site.

Follow Rolex on WeChat by scanning the QR code.

How to set your sky-dweller

How to set your sky-dweller

1. The Reference Time

SETTING THE REFERENCE TIME

Unscrew the crown and then pull it out to the first notch.

SETTING THE REFERENCE TIME

Put the bezel in position III by turning it counterclockwise as far as it will go. The seconds hand is stopped, allowing you to set the time to the precise second.

SETTING THE REFERENCE TIME

Set the hour on the 24-hour disc and the minutes shown by the centre minute hand by turning the crown in either direction.

SETTING THE REFERENCE TIME

Return the bezel to the neutral position by turning it clockwise as far as it will go.

SETTING THE <em> REFERENCE TIME </em>

Push in and screw down the crown.

2. The local time

SETTING THE LOCAL TIME

Unscrew the crown and then pull it out to the first notch.

SETTING THE LOCAL TIME

Put the bezel in position II

SETTING THE LOCAL TIME

Set the local time (displayed by the jumping hour hand) by turning the crown in either direction. The 24-hour disc and the minute hand do not move. Only the hour hand moves in increments of one hour. The date changes when the hour hand passes midnight, only in the clockwise direction. To avoid confusion between a.m. and p.m. hours, move the hour hand to 12 o’clock. If the date changes, it is midnight.

SETTING THE <em> LOCAL TIME </em>

Return the bezel to the neutral position by turning it clockwise as far as it will go.

Push in and screw down the crown.